Product ID:FM 275 ADHESIVE FILM
MSDS Date:07/01/1997
FSC:8040
NIIN:00F045149
Status Code:A
MSDS Number: CKRDJ

Emergency Phone: 201-357-3100/201-652-6013

Info Phone: 201-357-3100/201-652-6013

Cage: 83289

Telephone: 201-831-2000/201-357-3100

Cage: 83289

MODIFIED POLY(AROMATIC GLYCIDYL ETHER)

POLY(AROMATIC GLYCIDYL ETHER)

PHENOLIC RESIN

Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE ALLERGIC SKIN
REACTION/PRIMARY IRRITATION W/EPOXY RESINS. OVEREXPOSURE TO VAPOR
DURING HEAT CURING MAY CAUSE IRRITATION/INJURY OF THE RESPIRATORY
TRACT & EYE IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION.

First Aid:SKIN: WASH W/SOAP & PLENTY OF WATER. OBTAIN MEDICAL ATTENTION
IN ALL CASES.REMOVE CONTAMINATED CLOTHING AND WASH BEFORE REUSE.

Extinguishing Media:USE WATER, CO2/DRY CHEMICAL.
Fire Fighting Procedures:WEAR SCBA IN POSITIVE PRESSURE MODE.

Spill Release Procedures:WHERE EXPOSURE LEVEL ISN'T KNOWN, WEAR NIOSH
APPROVED POSITIVE PRESSURE SELF CONTAINED RESPIRATOR. WHERE IT IS
KNOWN, WEAR NIOSH APPROVED RESPIRATOR SUITABLE FOR LEVEL OF
EXPOSURE. SWEEP UP & PLACE IN A WASTE DISPOSAL CONTAINER. FLUSH
AREA W/WATER.

Handling and Storage Precautions:WASH THOROUGHLY BEFORE
EATING/DRINKING/SMOKING & AT END OF WORKDAY.
Other Precautions:AVOID PROLONGED/REPEATED CONTACT W/SKIN.

Respiratory Protection:WEAR NIOSH APPROVED RESPIRATOR BY AN INDUSTRIAL
HYGIENIST MAY BE NECESSARY. A FULL FACEPIECE RESPIRATOR ALSO
PROVIDES EYE & FACE PROTECTION.
Ventilation:LOCAL EXHAUST VENTILATION WHEN SPRAYING/CURING AT ELEVATED
TEMP.
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL SPLASH PROOF GOGGLES/FACESHIELD
Other Protective Equipment:IMPERVIOUS APRON, WORKPANTS, LONG SLEEVE
WORK SHIRT, DISPOSABLE COVERALLS, BARRIER CREAMS, EYEWASH, SAFETY
SHOWER.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING & SHOES
BEFORE REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Spec Gravity:1.3
Solubility in Water:NEGLIGIBLE
Appearance and Odor:RED SLIGHTLY TACKY FILM W/NO ODOR.
Percent Volatiles by Volume:<1 (BY WT)

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS, BASES/AMINES, OXIDIZING AGENTS.
Hazardous Decomposition Products:THERMAL: CO, CO2, SULFUR DIOXIDE,
OXIDES OF NITROGEN, AMMONIA, HYDROGEN CYANIDE & OXIDES OF
PHOSPHORUS.
Conditions to Avoid Polymerization:CONTACT W/ACIDS, OXIDIZING AGENTS,
FREE RADICAL INITIATORS, BASES/AMINES. HEAT >100F.

Waste Disposal Methods:DISPOSAL MUST BE MADE IAW/APPLICABLE
GOVERNMENTAL REGULATIONS.

Toxicological Information:ALLERGIC SKIN REACTIONS OR PRIMARY SKIN
IRRITATION MAY BE PRODUCED BY PROLONGED OR REPEATED DERMAL CONTACT
WITH EPOXY RESINS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

SARA Title III Information:ACUTE = Y.
Federal Regulatory Information:THIS PRODUCT IS CONSIDERED AN ARTICLE.